Valve Cover - RH: Notes
WARNING: This page is about a different car, the 2008 Ford Pickup and 2008 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Material
| Item | Specification |
|---|---|
| Motorcraft Metal Surface Prep ZC-31 |
- |
| Silicone Brake Caliper Grease and Dielectric Compound XG-3-A |
ESE-M1C171-A |
| Silicone Gasket and Sealant TA-30 |
WSE-M4G323-A4 |
| Silicone Gasket Remover ZC-30 |
- |
| Item | Part Number | Description |
|---|---|---|
| 1 | - | Transmission wiring harness electrical connector and wiring harness retainer (part of 15525) |
| 2 | - | Engine wiring harness electrical connector and wiring harness retainer (part of 12B637) |
Fig 2: Exploded View Of Transmission Fluid Level Indicator Tube, Crankcase Vent Tube & Coolant Hose With Torque Specification
| Item | Part Number | Description |
|---|---|---|
| 1 | N859356 | Transmission fluid level indicator tube support bracket bolt |
| 2 | 7A228 | Transmission fluid level indicator tube |
| 3 | 9929 | Heater coolant hose |
| 4 | - | Heater coolant hose clamp |
| 5 | 6758 | Crankcase ventilation tube quick connect coupling |
| Item | Part Number | Description |
|---|---|---|
| 1 | - | Variable camshaft timing (VCT) solenoid electrical connector (part of 12B637) |
| 2 | - | Engine wiring harness retainers (part of 12B637) |
| 3 | - | Engine wiring harness retainers (part of 12B637) |
| 4 | - | RH ignition coil electrical connector (4 required) (part of 12B637) |
| 5 | W706175 | RH ignition coil bolt (4 required) |
| 6 | 12A366 | RH ignition coil (4 required) |
| 7 | 6582 | RH valve cover |
| 8 | 6584 | RH valve cover gasket |