Valve Cover - LH: Notes

WARNING: This page is about a different car, the 2008 Ford Pickup and 2008 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Material

Item	Specification
Motorcraft Metal Surface Prep ZC-31	-
Silicone Brake Caliper Grease and Dielectric Compound XG-3-A	ESE-M1C171-A
Silicone Gasket and Sealant TA-30	WSE-M4G323-A4
Silicone Gasket Remover ZC-30	-

Fig 1: Exploded View Of Valve Cover - LH (1 Of 3)

Courtesy of FORD MOTOR CO.

Item	Part Number	Description
1	-	Evaporative emissions (EVAP) fuel vapor tube quick connect fitting
2	-	EVAP fuel vapor tube quick connect fitting

Fig 2: Exploded View Of Valve Cover - LH (2 Of 3)

Courtesy of FORD MOTOR CO.

Item	Part Number	Description
3	6K817	PCV tube
4	-	Degas bottle coolant outlet hose clamp
5	-	Degas bottle coolant outlet hose
6	-	LH radio ignition interference capacitor electrical connector (part of 12B637)
7	-	LH variable camshaft timing (VCT) solenoid electrical connector (part of 12B637)
8	-	Engine wiring harness retainers (part of 12B637)
9	-	Intake manifold vacuum tube-to-brake booster hose
10	9D446	Intake manifold vacuum tube

Fig 3: Exploded View Of Valve Cover With Torque Specification - LH (3 Of 3)

Courtesy of FORD MOTOR CO.

Item	Part Number	Description
11	-	Engine wiring harness retainers (part of 12B637)
12	-	Camshaft position (CMP) sensor electrical connector (part of 12B637)
13	-	LH ignition coil electrical connector (4 required) (part of 12B637)
14	W706175	LH ignition coil bolt (4 required)
15	12A366	LH ignition coil (4 required)
16	6A505	LH valve cover
17	6A559	LH valve cover gasket