Remove/Install Holder Of Electropneumatic Controller Unit - AR32.22-P-0017S

Model 223 

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove electropneumatic controller unit.		AR32.22-P-2027S
2	Unclip lines (2) from holder (1).
3	Unclip retaining clips (4) with electrical plug from holder (1).
4	Remove the filter (3) from holder (1).
5	Remove nuts (5).	Three nuts (5) are installed. Nut bracket for air compressor to longitudinal member	*BA32.22-P-1001-03F
6	Take off the bracket (1).
7	Install in the reverse order.

AIR SUSPENSION

Number	Designation		Model 223
BA32.22-P-1001-03F	Nut, bracket for air compressor to longitudinal member	Nm	20