Thrust Arm - BA35.20-P-1000-05M
Model 223, 294, 295, 296, 297
MODIFICATION NOTES
| 11.10.2023 | Value changed: Screw/nut, thrust arm to rear axle carrier | Model 223 with code Z07 (B7 armoring on special protection version) |
THRUST ARM
| Number | Designation | Model 223 except code Z07 (B7 armoring on special protection version) | Model 223 with code Z07 (B7 armoring on special protection version) | |||
|---|---|---|---|---|---|---|
| BA35.20-P-1001-05M | Screw/nut, thrust arm to rear axle carrier | M12 | Stage 1 | Nm | 60 | - |
| Stage 2 | ∠° | 180 | - | |||
| M16 | Stage 1 | Nm | - | 140 | ||
| Stage 2 | ∠° | - | 90 | |||
| BA35.20-P-1002-05M | Screw/nut, thrust arm to wheel carrier | M12 | Stage 1 | Nm | 60 | - |
| Stage 2 | ∠° | 180 | - | |||
| M16 | Stage 1 | Nm | - | 180 | ||
| Stage 2 | ∠° | - | 180 | |||
THRUST ARM
| Number | Designation | Model 294 | Model 295 | |||
|---|---|---|---|---|---|---|
| BA35.20-P-1001-05M | Screw/nut, thrust arm to rear axle carrier | M12 | Stage 1 | Nm | 60 | 60 |
| Stage 2 | ∠° | 180 | 180 | |||
| M16 | Stage 1 | Nm | - | - | ||
| Stage 2 | ∠° | - | - | |||
| BA35.20-P-1002-05M | Screw/nut, thrust arm to wheel carrier | M12 | Stage 1 | Nm | 60 | 60 |
| Stage 2 | ∠° | 180 | 180 | |||
| M16 | Stage 1 | Nm | - | - | ||
| Stage 2 | ∠° | - | - | |||
THRUST ARM
| Number | Designation | Model 296 | Model 297 | |||
|---|---|---|---|---|---|---|
| BA35.20-P-1001-05M | Screw/nut, thrust arm to rear axle carrier | M12 | Stage 1 | Nm | 60 | 60 |
| Stage 2 | ∠° | 180 | 180 | |||
| M16 | Stage 1 | Nm | - | - | ||
| Stage 2 | ∠° | - | - | |||
| BA35.20-P-1002-05M | Screw/nut, thrust arm to wheel carrier | M12 | Stage 1 | Nm | 60 | 60 |
| Stage 2 | ∠° | 180 | 180 | |||
| M16 | Stage 1 | Nm | - | - | ||
| Stage 2 | ∠° | - | - | |||