140 589 14 15 00 Drift - WS35.00-P-0191C
Model 124, 129, 140.028/032/033 as of 01.12.01, 166, 167, 170 as of 01.12.01, 171, 172, 192, 201, 202 as of 01.12.01, 203 as of 01.12.01, 204, 205, 206, 207, 208 as of 01.12.01, 209, 210 as of 01.12.01, 212, 213, 214, 218, 223, 232, 236, 238, 253, 254, 257, 290, 292
Use in FG 35/Set C
Purpose:
Drift for pounding the radial shaft sealing ring drive pinion into the rear axle housing.
Procurement information:
This workshop equipment can be ordered directly through the regular replacement part ordering process at the GLC/LC.