460 589 15 15 00 Drift Punch - WS33.00-P-0071B
Model 204, 205, 206, 207, 212, 213, 214, 216, 217, 218, 221, 222, 223, 236, 238, 253, 254, 257, 290
Model 460, 461, 463, 464 with front axle 730.3
Use in FG 33/Set B
Purpose:
Drift for mounting sealing rings and coupling flange onto drive pinion.
Drift for mounting deep-groove ball bearing on intermediate shaft.
NOTE:
Front axle 730.3
As of axle no. 7500804 with BGS 7501979 series, two sealing rings are installed.
| 460 589 15 15 00 Drift | FG 28/Set C | WS28.00-N-3078C | |
| 460 589 15 15 00 Drift | FG 35/Set B | WS35.00-N-3047B |
Procurement information:
This workshop equipment can be ordered directly through the regular replacement part ordering process at the GLC/LC.