Remove/Install Leg Rest - AR91.12-P-0011S

Model 223 

with code 223 (Electric backrest adjustment and head restraints) 

with code 224 (Individual rear seats) 

with code 453 (Rear reclining seat) 

Model 223 

with code 223 (Electric backrest adjustment and head restraints) 

with code 453 (Rear reclining seat) 

except code 224 (Individual rear seats) 

Courtesy of MERCEDES-BENZ USA

Shown on left rear seat 

Notice	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
1	Switch off ignition and store transmitter key outside of transmitter range (min. 2 m).
2	Extend leg rest (1) completely.
3	Unclip trim (2) and extend in direction of arrow.	When retracting trim (2), lift trim (3) slightly.
		Dismantling tool	Fig 1
4	Release and disconnect electrical connector (4).
5	Release leg rest (1) (arrows a) and extend in direction of travel.	Dismantling tool	Fig 1
6	Install in the reverse order.

Fig 1: Identifying Dismantling Tool (000 589 95 63 00)

Courtesy of MERCEDES-BENZ USA