220 589 01 99 04 MCP 2.8 Crimping Set - WS00.19-P-0001-04B

Model All

Use in FG 00/Set B

Intended use:

Crimping set MCP 2.8 for crimping MCP 2.8 contacts on lines with a cross section of 1.5...2.5 mm² /4 mm² , in combination with W 220 589 01 99 10 manual crimper.

NOTE: Replacement part: W 220 589s01 99 14 positioner MCP 2.8

Courtesy of MERCEDES-BENZ USA