220 589 01 99 03 MCP 2.8 Crimping Set - WS00.19-P-0001-03B

Model All

Use in FG 00/Set B

Intended use:

Crimping set MCP 2.8 for crimping MCP 2.8 contacts on lines with a cross section of 0.35 mm² /0.5...1.0 mm² , in combination with W 220 589 01 99 10 manual crimper.

NOTE: Replacement part: W 220 589 01 99 13 MCP 2.8 positioner

Courtesy of MERCEDES-BENZ USA