Notes On Sealant Path For Front Cover To Cylinder Head XXX - AH01.30-P-1000-02C
Engine 275, 277, 279, 285
Shown on right cap
The line (F
) marks the sealant path.
Shown on left cap
The line (F
) marks the sealant path.
The sealant must be applied only to the specified surfaces with a bead of 2.0 mm (±0.5 mm).
The sealant must be applied within 10 minutes.
The sealant bead must not be spread. Only the approved sealant may be used.