Turbocharger - BA09.40-P-1000-02MRT
Engine 254, 256
TURBOCHARGER
| Number | Designation | Engine 254 | Engine 256 | |||
|---|---|---|---|---|---|---|
| BA09.40-P-1001-02MRT | Profile clamp, exhaust system to exhaust gas turbocharger | Nm | 17 | 17 | ||
| BA09.40-P-1002-02MRT | Screw, support to exhaust gas turbocharger/crankcase | M8 | Stage 1 | Nm | 20 | 20 |
| Stage 2 | ∠° | 90 | 90 | |||
| M6 | Nm | 8 | - | |||
| BA09.40-P-1003-02MRT | Bolt, bracket to turbocharger/cylinder head | M6 | Nm | - | 8 | |
| M8 | Nm | - | 33 | |||
| BA09.40-P-1004-02MRT | Nut/screw, heat shield to exhaust gas turbocharger/heat shield | Nm | 8 | 8 | ||
| BA09.40-P-1006-02MRT | Screw, oil feed line to exhaust gas turbocharger/cylinder head/bracket | Stage 1 | Nm | 8 | 8 | |
| Stage 2 | ∠° | 60 | 60 | |||
| Heat shield | Nm | - | 8 | |||
| BA09.40-P-1008-02MRT | Bolt, oil return line to turbocharger/crankcase | Stage 1 | Nm | 8 | 8 | |
| Stage 2 | ∠° | 60 | 60 | |||
| BA09.40-P-1012-02MRT | Screw, water feed line/return line to exhaust gas turbocharger/crankcase/cylinder head | Stage 1 | Nm | 8 | 8 | |
| Stage 2 | ∠° | 60 | 60 | |||
| BA09.40-P-1013-02MRT | Bolt, switchover valve to turbocharger | Nm | - | 7 | ||
| BA09.40-P-1014-02MRT | Screw, side heat shield to upper heat shield | Nm | - | 8 | ||
| BA09.40-P-1015-02MRT | Screw, coolant feed pipe to oil filter housing | Nm | - | 8 | ||
| BA09.40-P-1016-02MRT | Screw, support to heat shield | M6 | Stage 1 | Nm | 8 | - |
| Stage 2 | ∠° | 60 | - | |||
| BA09.40-P-1017-02MRT | Screw, terminal strip to cylinder head | M8 | Nm | 20 | - | |
| BA09.40-P-1018-02MRT | Nut, peg board/exhaust gas turbocharger to cylinder head | Nm | 23 | - | ||
| BA09.40-P-1019-02MRT | Stud bolt, peg board/exhaust gas turbocharger to cylinder head | Nm | 15 | - | ||
| BA09.40-P-1020-02MRT | Screw, actuator to exhaust gas turbocharger | Nm | 9 | - | ||
| BA09.40-P-1021-02MRT | Screw, support to exhaust gas turbocharger/heat shield | Nm | 8 | - | ||
| BA09.40-P-1022-02MRT | Screw, E-actuator to exhaust gas turbocharger | M6 | Stage 1 | Nm | 5 | - |
| Stage 2 | Nm | 9 | - | |||
| BA09.40-P-1023-02MRT | Screw, boost pressure regulator to exhaust gas turbocharger | Nm | - | 9 | ||
| BA09.40-P-1024-02MRT | Screw, compressor wheel housing to exhaust gas turbocharger | Nm | - | 9 | ||
| BA09.40-P-1025-02MRT | Screw, inlet nozzle to compressor wheel housing | Nm | - | 9 | ||