Charge Air Pipe/Charge Air Cooling - BA09.41-P-1000-01MRT
Engine 256
CHARGE AIR PIPE/CHARGE AIR COOLING
| Number | Designation | Engine 256 | ||
|---|---|---|---|---|
| BA09.41-P-1001-01MRT | Screw/bolt, charge air distributor to cylinder head | Nm | 8 | |
| BA09.41-P-1002-01MRT | Screw/bolt, charge air line to chain case cover | Nm | 8 | |
| BA09.41-P-1003-01MRT | Screw, charge air line to check valve | Nm | 10 | |
| BA09.41-P-1004-01MRT | Screw, charge air line to timing case | Nm | 8 | |
| BA09.41-P-1005-01MRT | Screw, charge air line bracket to throttle valve actuator | Nm | 8 | |
| BA09.41-P-1006-01MRT | Screw, charge air line to additional compressor | Nm | 8 | |
| BA09.41-P-1007-01MRT | Screw, pressure transducer to charge air line | Nm | 8 | |
| BA09.41-P-1008-01MRT | Screw, charge air pressure transducer | Nm | 6 | |
| BA09.41-P-1009-01MRT | Screw clamp, boot between charge air lines | Nm | 4 | |
| BA09.41-P-1010-01MRT | Screw clamp, boot to exhaust gas turbocharger | Nm | 6 | |
| BA09.41-P-1011-01MRT | Screw, check valve to chain case cover | Nm | 10 | |
| BA09.41-P-1012-01MRT | Bolt, pressure sensor to charge air distributor | Nm | 6 | |
| BA09.41-P-1013-01MRT | Screw, coolant return line to charge air distributor | Nm | 8 | |
| BA09.41-P-1014-01MRT | Screw, tank regeneration to charge-air distributor | Nm | 8 | |
| BA09.41-P-1015-01MRT | Screw, charge air distributor support to crankcase | Nm | 8 | |
| BA09.41-P-1016-01MRT | Bolt, throttle valve actuator to charge air distributor | Stage 1 | Nm | 5 |
| Stage 2 | Nm | 8 | ||
| BA09.41-P-1017-01MRT | Clamp, charge air hose between charge air lines | Nm | 4 | |
| BA09.41-P-1018-01MRT | Screw/bolt, support to charge air distributor | Nm | 20 | |
| BA09.41-P-1019-01MRT | Screw, solenoid valve to charge air line | Nm | 8 | |
| BA09.41-P-1020-01MRT | Screw, purge line with pressure sensor to charge-air distributor | M6 | Nm | 8 |
| BA09.41-P-1021-01MRT | Screw, low-temperature circuit switchover valve to holder | Nm | 8 | |