Coolant Pump, Coolant Thermostat - BA20.10-P-1000-01ZA
Engine 176, 177, 178
MODIFICATION NOTES
| 27.08.2020 | Value changed: Screw, shutoff valve to crankcase/cylinder head |
COOLANT PUMP, COOLANT THERMOSTAT
| Number | Designation | Engine 176 | Engine 177 | ||
|---|---|---|---|---|---|
| BA20.10-P-1001-01ZA | Bolt, coolant pump to crankcase | Nm | 8 | 8 | |
| BA20.10-P-1002-01ZA | Bolt, thermostat housing to crankcase | Nm | 8 | 8 | |
| BA20.10-P-1003-01ZA | Bolt, shield to thermostat housing | Nm | - | - | |
| BA20.10-P-1004-01ZA | Bolt, thermostat to thermostat housing | Nm | 4 | 4 | |
| BA20.10-P-1005-01ZA | Screw, coolant outlet fitting/coolant inlet fitting/coolant fitting to thermostat housing | Nm | 8 | 8 | |
| BA20.10-P-1006-01ZA | Screw, shutoff valve to crankcase/cylinder head | Nm | 9 | 9 | |
| BA20.10-P-1007-01ZA | Nut/screw, low-temperature circuit pump/switchover valve retaining bracket to holder | Nm | 8 | 8 | |
| BA20.10-P-1008-01ZA | Bolt, low-temperature circuit pump bracket to front axle carrier | M6 | Nm | 8 | 8 |
| M8 | Nm | - | - | ||
| BA20.10-P-1009-01ZA | Screw, coolant line to thermostat housing | M6 | Nm | 8 | - |
| BA20.10-P-1010-01ZA | Screw, coolant outlet fitting/coolant connection to oil separator | M6 | Nm | - | 8 |
| BA20.10-P-1011-01ZA | Screw, clip to auxiliary heater circulation pump holder | Nm | 6 | - | |
COOLANT PUMP, COOLANT THERMOSTAT
| Number | Designation | Engine 178 | ||
|---|---|---|---|---|
| BA20.10-P-1001-01ZA | Bolt, coolant pump to crankcase | Nm | 8 | |
| BA20.10-P-1002-01ZA | Bolt, thermostat housing to crankcase | Nm | 8 | |
| BA20.10-P-1003-01ZA | Bolt, shield to thermostat housing | Nm | 8 | |
| BA20.10-P-1004-01ZA | Bolt, thermostat to thermostat housing | Nm | 4 | |
| BA20.10-P-1005-01ZA | Screw, coolant outlet fitting/coolant inlet fitting/coolant fitting to thermostat housing | Nm | 9 | |
| BA20.10-P-1006-01ZA | Screw, shutoff valve to crankcase/cylinder head | Nm | 9 | |
| BA20.10-P-1007-01ZA | Nut/screw, low-temperature circuit pump/switchover valve retaining bracket to holder | Nm | 8 | |
| BA20.10-P-1008-01ZA | Bolt, low-temperature circuit pump bracket to front axle carrier | M6 | Nm | - |
| M8 | Nm | 9 | ||
| BA20.10-P-1009-01ZA | Screw, coolant line to thermostat housing | M6 | Nm | - |
| BA20.10-P-1010-01ZA | Screw, coolant outlet fitting/coolant connection to oil separator | M6 | Nm | - |
| BA20.10-P-1011-01ZA | Screw, clip to auxiliary heater circulation pump holder | Nm | - | |