000 588 33 21 00 Leak Tester - WS09.00-P-0047B
Engine all (CAR, Light transporter, smart)
Use in FG 01/09/47/49/set B
Purpose:
Leaktightness tester for leak test using flue gas and testing fluid.
NOTE:
For leak test of the intake air system (from air filter to intake valve).
For leak test of vacuum system (from vacuum pump up to individual actuators).
For leak test of exhaust system (from exhaust pipe up to exhaust manifold).
For leak test of vacuum system (from vacuum pump up to individual actuators).
For leak test of exhaust system (from exhaust pipe up to exhaust manifold).
| Criteria catalog W 000 588 33 21 00 Leak tester, form | Engine all (CAR, Light transporter, smart) | OF09.00-P-0001-01B |
Procurement information:
This catalog is intended to provide help in selecting a workshop equipment variant that is available on the free market. There is no reference to specific manufacturers or articles. It only describes the minimum requirements for fulfilling the Mercedes-Benz criteria. For product queries, the criteria catalog can be sent directly to the manufacturers/suppliers.