Tightening Pattern For Turbocharger - AR09.40-P-6020-10MRT
Engine 254.9, 256.9
MODIFICATION NOTES
| 24.06.2020 | Operation step added. | Operation step 3 | |
| 24.01.2023 | Nut, exhaust manifold (exhaust gas turbocharger) to cylinder head | Engine 256.9 | BA14.10-P-1001-02MRT |
| 24.01.2023 | Nut exhaust manifold (exhaust gas turbocharger) on cylinder head | Motor 256.9 | BA14.10-P-1001-02MRT |
TURBOCHARGER
| Number | Designation | Engine 254 | |
|---|---|---|---|
| BA09.40-P-1018-02MRT | Nut, peg board/exhaust gas turbocharger to cylinder head | Nm | 23 |
EXHAUST MANIFOLD
| Number | Designation | Engine 256.9 | ||
|---|---|---|---|---|
| BA14.10-P-1001-02MRT | Nut, exhaust manifold (exhaust gas turbocharger) to cylinder head | Stage 1 | Nm | 21 |
| Stage 2 | Nm | 21 | ||
| Stage 3 | Nm | 21 | ||
EXHAUST MANIFOLD
| Number | Designation | Engine 256.9 | |
|---|---|---|---|
| BA14.10-P-1002-02MRT | Screw, exhaust manifold (exhaust gas turbocharger) strip clamp to cylinder head | Nm | 20 |
Engine 256.9
- Tighten screws (8) of terminal strips Engine 256.9
.
Engine 256.9
- Hook exhaust gas turbocharger into terminal strips and tighten nuts (1-7) in numerical order Engine 256.9
Engine 254.9
- Hook exhaust gas turbocharger into
terminal strip and tighten nuts (1-5) in numerical order Engine 254.9