Prepare Windshield Window Frame For Installation - AR67.10-P-1700-03S

Model 206, 254 

Model 214 

Model 223 

except code Z07 (B7 armoring on special protection version) 

Model 232 

Model 236 

Model 294 

Model 295 

Model 296 

Model 297 

Notice	Notes on handling adhesive		AH67.00-P-1000-01A
Notice	General notes about painting the body flange in the glazing area		AH98.00-P-9408-06A
	Notes on safety-relevant components		AH00.00-Z-0019-01A

When damaged to a degree of > 10% it is possible to repair with primer stick. For a damage severity < 10%, window frame (1) must be coated with primer filler.

Otherwise corrosion damage may occur.

The sealing compound of the laser weld seam may be in the bonding area (2) of the windshield and must be cut back if necessary. Repair damaged areas with window adhesive if necessary.

Otherwise, the windshield cannot be positioned correctly and/or leaks may occur.

Use only primer fillers approved by manufacturer. See guidelines for paint technology in the workshop portal.

Only use the adhesive kit indicated in the XENTRY Portal parts information.

1. Level remaining adhesive material on window frame (1) down to a height of approx. 1 mm using a suitable scraper and remove loose old adhesive material.

   Model 214

   with code 444 (Advanced Head-up Display (HUD))

   Model 223

   with code 445 (Head-up display

   with augmented reality.)

   except code Z07 (B7 armoring on special protection version)

   Model 296, 297

   with code 445 (Head-up display with augmented reality.)

   There must be no adhesive material in area of spacer. Spacers must be in contact with painted bodyshell. Otherwise, the head-up display with augmented reality cannot be calibrated.

2. Clean working area.
3. Clean bonding area (2) on window frame (1) with cleaner and rub dry with dry cloth.

   Courtesy of MERCEDES-BENZ USA

4. Repair paint damage in bonding area (2) and on window frame (1) with primer stick or primer filler.

   Observe the manufacturer's specifications for the curing and processing time of the primer filler.

5. Apply primer on window frame (1) in areas with missing or damaged old adhesive material.

   Shown on model 223