Align Windshield In Body Opening - AR67.10-P-1000-09S
Model 206, 254
Model 214
Model 223
except code Z07 (B7 armoring on special protection version)
Model 232
Model 236
Model 294
Model 295
Model 296
Model 297
| Notes on safety-relevant components | AH00.00-Z-0019-01A |
TEST AND ADJUSTMENT VALUES FOR WINDSHIELD
| Number | Designation | Model 232 | ||
|---|---|---|---|---|
| BE67.10-P-1001-01A | Distance between top edge of window and front edge of roof/top of windshield trim | Dimension "A" | mm | 3 (±1) |
| - | - | |||
TEST AND ADJUSTMENT VALUES FOR WINDSHIELD
| Number | Designation | Model 223 except code Z07 (B7 armoring on special protection version) | Model 294 | ||
|---|---|---|---|---|---|
| BE67.10-P-1001-01E | Distance between top edge of window and front edge of roof | Dimension "A" | mm | 3, 5 (±1, 5) | 2, 5 (±1, 0) |
| Picture | AR67.10-P-1000-09S | AR67.10-P-1000-09S | |||
TEST AND ADJUSTMENT VALUES FOR WINDSHIELD
| Number | Designation | Model 295 | Model 296 | ||
|---|---|---|---|---|---|
| BE67.10-P-1001-01E | Distance between top edge of window and front edge of roof | Dimension "A" | mm | 2, 6 (±1, 0) | 2, 5 (±1, 0) |
| Picture | AR67.10-P-1000-09S | AR67.10-P-1000-09S | |||
TEST AND ADJUSTMENT VALUES FOR WINDSHIELD
| Number | Designation | Model 297 | ||
|---|---|---|---|---|
| BE67.10-P-1001-01E | Distance between top edge of window and front edge of roof | Dimension "A" | mm | 3, 0 (±1, 0) |
| Picture | AR67.10-P-1000-09S | |||
WINDSHIELD
| Number | Designation | Model 206 | Model 214 | |
|---|---|---|---|---|
| BE67.10-P-1001-01H | Distance between top edge of window and front edge of roof | mm | 2, 2 (±1, 0) | 2, 2 (±1, 0) |
WINDSHIELD
| Number | Designation | Model 236 | Model 254 | |
|---|---|---|---|---|
| BE67.10-P-1001-01H | Distance between top edge of window and front edge of roof | mm | 2, 45 (±1, 0) | 2, 5 (±1, 0) |
WINDSHIELD
| Number | Designation | Model 206 | Model 214 | |
|---|---|---|---|---|
| BE67.10-P-1002-01H | Distance between top edge of window and frame of panoramic roof | mm | 2, 3 (±1, 0) | 2, 5 (±1, 0) |
WINDSHIELD
| Number | Designation | Model 236 | Model 254 | |
|---|---|---|---|---|
| BE67.10-P-1002-01H | Distance between top edge of window and frame of panoramic roof | mm | 5, 7 (±1, 0) | 2, 5 (±1, 0) |
Before applying adhesive bead, place windshield (1) on spacers (4) and align in body opening.
- Set down windshield (1) with spacers (4) on lower window frame (3) and with spacer strip (2) on upper window frame (3) and center.
Aid of helper required.
- Adjust clearance (a) at windshield upper edge using
feeler gauge.
Model 236
Model 236
except code Z07 (B7 armoring on special protection version)
- Affix adhesive strips (B).
- Cut through adhesive strips (B) at top edge of windshield (1).
- Remove windshield (1) from window frame.
Shown on model 223 except code Z07 (B7 armoring for special protection version)