Remove/Install Front Door Armrest - AR72.10-P-1035S

Model 223 

except code Z07 (B7 armoring on special protection version) 

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Unclip trim strip (1).	Long wedge	Fig 1
2	Remove screw (2).
3	Remove armrest (3) at an incline towards rear (arrow).
4	Disconnect electrical connection.	Model 223 with code 906 (Front armrest heater) except code Z07 (B7 armoring on special protection version)
5	Install in the reverse order.

Fig 1: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ USA