000 588 38 80 00 Holding Device - WS72.00-P-0039B
Model All (4xWD, CAR, Heavy transporter, Light transporter)
Except for special protection vehicles
Use in FG 72/set B
Purpose:
Holding device for installing and removing doors.
Technical Note:
The maximum load capacity of the holding device is 150 kg.
NOTE:
Please observe the manufacturer specific accessories.
Procurement information:
This workshop appliance is not sold through the regular replacement part ordering process in GLC/LC, but instead directly through the manufacturer/supplier. Recommended workshop equipment and information about the manufacturers can be found in the WS document (see below).
Manufacturer
CON4TOOLS GmbH
Turnstrasse 11
42289 Wuppertal
Germany
http://www.con4tools.de
- Type/model: Multi-functional holding device for doors
Article no.:EFA06