Remove/Install Folding Table - AR68.20-P-8305S

Model 223 

with code 224 (Individual rear seats) 

with code 449 (Folding table in the rear, left and right) 

Shown on model 223 except for code 326 (Premium rear armrest) 

Courtesy of MERCEDES-BENZ USA

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Open lid of armrest of rear center console (1).
2	Unhook trim plate on left (2) and trim plate on right (3) and remove.	First press trim plate on left (2) and trim plate on right (3) toward rear, then pull upward (arrow A) and then remove (arrow B).
3	Unclip center trim plate (4) upward.
4	Remove control unit for mobile phone cradle in rear passenger compartment.	Model 223 with code 224 (Individual rear seats) with code 326 (Premium rear armrest) with code 449 (Folding table in the rear, left and right) with code 898 (Wireless telephone charging in rear passenger compartment)
			AR82.70-P-0017SB
5	Remove screws (5).
6	Raise folding tables (6).
7	Lift square bearing shaft (7) and put down on reinforcement (8) and guide folding tables (6) vertically upward and out of the rear center console (1).	The catch hooks (9) on the folding tables (6) must engage in the retaining tabs (10).
8	Install in the reverse order.