Check And Correct The Adjustment Of The Headlamps - AP82.10-P-8260LA

Model 223 

Shown on headlamp in model 223 with code 641 (Dynamic LED headlamp for left-hand traffic) 

Courtesy of MERCEDES-BENZ USA

Shown on headlamp in model 223 with code 317 (Digital LED headlamp for left-hand traffic) 

Courtesy of MERCEDES-BENZ USA

Shown on model 223.160 

Courtesy of MERCEDES-BENZ USA

	Risk of accident  from vehicle starting off by itself when engine running. Risk of injury  (bruises and burns) resulting from working on the engine while it is being started or when it is running.	Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
	General information on checking/correcting headlamp adjustment		AH82.10-P-1000-01A
	Check
1	Prepare vehicle for headlamp adjustment check at headlamp adjustment station.		AP82.10-P-8259SA
2	Check low beam setting, adjust if necessary.	Model 223 with code 641 (Dynamic LED headlamps, left-hand traffic) except code 316 (Digital LED headlamps, SAE right-hand traffic) except code 317 (Digital LED headlamps, left-hand traffic) except code 318 (Digital LED headlamps, right-hand traffic) except code 640 (SAE dynamic LED headlamps, right-hand traffic) except code 642 (Dynamic LED headlamps, right-hand traffic) Model 223 with code 642 (Dynamic LED headlamps, right-hand traffic) except code 316 (Digital LED headlamps, SAE right-hand traffic) except code 317 (Digital LED headlamps, left-hand traffic) except code 318 (Digital LED headlamps, right-hand traffic) except code 640 (SAE dynamic LED headlamps, right-hand traffic) except code 641 (Dynamic LED headlamps, left-hand traffic)	AP82.10-P-8263LAB
		Model 223 with code 640 (SAE dynamic LED headlamps, right-hand traffic) except code 316 (Digital LED headlamps, SAE right-hand traffic) except code 317 (Digital LED headlamps, left-hand traffic) except code 318 (Digital LED headlamps, right-hand traffic) except code 641 (Dynamic LED headlamps, left-hand traffic) except code 642 (Dynamic LED headlamps, right-hand traffic)	AP82.10-P-8263LAC
		Model 223 with code 317 (Digital LED headlamps, left-hand traffic) except code 316 (Digital LED headlamps, SAE right-hand traffic) except code 318 (Digital LED headlamps, right-hand traffic) except code 640 (SAE dynamic LED headlamps, right-hand traffic) except code 641 (Dynamic LED headlamps, left-hand traffic) except code 642 (Dynamic LED headlamps, right-hand traffic) Model 223 with code 318 (Digital LED headlamps, right-hand traffic) except code 316 (Digital LED headlamps, SAE right-hand traffic) except code 317 (Digital LED headlamps, left-hand traffic) except code 640 (SAE dynamic LED headlamps, right-hand traffic) except code 641 (Dynamic LED headlamps, left-hand traffic) except code 642 (Dynamic LED headlamps, right-hand traffic)	AP82.10-P-8263LAD
		Model 223 with code 316 (Digital LED headlamps, SAE right-hand traffic) except code 317 (Digital LED headlamps, left-hand traffic) except code 318 (Digital LED headlamps, right-hand traffic) except code 640 (SAE dynamic LED headlamps, right-hand traffic) except code 641 (Dynamic LED headlamps, left-hand traffic) except code 642 (Dynamic LED headlamps, right-hand traffic) Before the low beams are checked and set, all the operation steps listed in the linked description must be performed carefully. Otherwise, it is not guaranteed that the headlamps concerned are correctly set. This can jeopardize the road safety of the vehicle.	AP82.10-P-8263LAA
3	Switch on main beam.	For vehicles with active high beams assistant, have an assistant operate headlamp flashing. Otherwise the check cannot be carried out correctly.
4	Check setting of high beam.	The high beams are adjusted when the corresponding low beam headlamp is adjusted; the high beams cannot be adjusted separately. If the high beam setting is not OK, ↓ rectify problems. After obtaining special order.	AP82.10-P-8260-02L
5	Reset light and suspension functions to input condition.