Remove/Install Tablet Cradle - AR82.80-P-0001SA
Model 223
with code 447 (Touchscreen in rear)
except code 224 (Individual rear seats)
| Notice | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1 | Connect diagnostic unit and read out data for takeover. | If the tablet cradle (A105/6) is replaced. | |
| AD00.00-P-2000-06FR | |||
| 2 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m). | ||
| 3 | Fold armrest (1) forward. | ||
| 4 | Remove tablet PC (A105/7). | ||
| 5 | Unhook fabric cover from rear armrest (1). | ||
| 6 | Remove screw/bolts (2). | ||
| 7 | Open stowage compartment (3). | ||
| 8 | Remove lock of stowage compartment (3) and unscrew screw (4) underneath. | ||
| 9 | Remove stowage compartment (3) and place to one side with electric lines connected. | Fig 1 | |
| 10 | Remove bolts (5). | ||
| 11 | Open cup holder and unscrew screws (6). | ||
| 12 | Remove cover (7) with tablet cradle (A105/6) and disconnect associated electrical connector. | ||
| 13 | Remove tablet cradle (A105/6) from cover (7). | ||
| 14 | Install in the reverse order. | ||
| 15 | Commission tablet cradle (A105/6). | If the tablet cradle (A105/6) is replaced. | |
| AD00.00-P-2000-06FR |