Remove/Install Global Positioning System (GPS) Antenna - AR82.85-P-0002ME
Model 167 With Code 355 (Preinstallation for retrofitting navigation system)
Model 167 With Code 362 (HERMES communications module LTE)
Shown on LHD model
Shown on LHD model
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1 | Remove left outside mirror (M21/1) or right outside mirror (M21/2). | AR88.70-P-9000ME | |
| 2 | Remove trim on left outside mirror (M21/1) or right outside mirror (M21/2). | AR88.70-P-9040ME | |
| 3 | Identify and expose electrical connection of GPS antenna (A2/23) at end of electrical wiring harness (4). | ||
| 4 | At plug housing (1), unclip fuse (2) (arrow A). | ||
| 5 | Unlock plug housing (1) (arrow B) and pull off electrical line (arrow C). | ||
| 6 | Remove cover (3) from left outside mirror (M21/1) or right outside mirror (M21/2). | ||
| 7 | Pull seal (5) approx. 15 cm over electrical wiring harness (4). | ||
| 8 | Pull electrical wiring harness (4) approx. 15 cm out of opening on left outside mirror (M21/1) oil right outside mirror (M21/2) (arrow d). | ||
| 9 | Identify electric line of GPS antenna (A2/23) and pull it completely out of seal (5) and opening. | ||
| 10 | Detach left telephone antenna (A2/102) and place to one side with line connected. | Model 167 with code 274 (Telephone antenna) with code 355 (Preinstallation for retrofitting navigation system) Model 167 with code 274 (Telephone antenna) with code 362 (HERMES communications module LTE) | AR82.62-P-0011ME |
| 11 | Remove screw (6). | ||
| 12 | Unscrew GPS antenna (A2/23) (arrow E) and remove. | ||
| 13 | Install in the reverse order. |