Remove/Install Front LED Matrix Lamp Unit Control Unit - AR82.10-P-2025ME
Model 167 With Code 640 (SAE dynamic LED headlamps, right-hand traffic)
Model 167 With Code 641 (Dynamic LED headlamps, left-hand traffic)
Model 167 With Code 642 (Dynamic LED headlamps, right-hand traffic)
Fig 1: Front LED Matrix Lamp Unit Control Unit Components Location - Model 167 With Code 640; 641; 642
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1 | Commission front left LED matrix lamp unit control unit (E1n11) or front right LED matrix lamp unit control unit (E2n11). | If front left LED matrix lamp unit control unit (E1n11) or front right LED matrix lamp unit control unit (E2n11) is replaced. | AD00.00-P-2000-06ME |
| Fig 2 | |||
| 2 | Remove left front lamp unit (E1) and/or right front lamp unit (E2). | AR82.10-P-4733ME | |
| 3 | Unscrew screw/bolts (1). | ||
| 4 | Remove front left LED matrix lamp unit control unit (E1n11) or front right LED matrix lamp unit control unit (E2n11) until the electrical connector is accessible. | ||
| 5 | Release and disconnect electrical connectors. | ||
| 6 | Install in the reverse order. |