Remove/Install Antenna Changeover Switch - AR82.62-P-0010ME

Model 167 With Code 380 (Car telephony package) With Code 899 (Multifunction telephony) 

Courtesy of MERCEDES-BENZ USA

Courtesy of MERCEDES-BENZ USA

Topical note	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
1	Remove front seats.		AR91.10-P-1000ME
2	Remove center console.		AR68.20-P-2000ME
3	Release and disconnect electrical connections (1).	The number of electrical connectors (1) varies depending on the vehicle equipment.
4	Unscrew nuts (3).
5	Unscrew bolts (4).
6	Unclip expansion rivets (5).	Dismantling tool	Fig 1
7	Remove bracket (6) together with air ducts (2)
8	Raise respective floor covering and remove air ducts (7, 10).	Ensure correct positioning of the air ducts (7) under the floor coverings.
9	Raise damping (8).
10	Release and disconnect electrical connectors at telephone antenna changeover switch (A2/168).	The number of electrical connectors varies according to vehicle equipment.
11	Open retaining clip (9).
12	Unclip telephone antenna changeover switch (A2/168) from bracket and remove.
13	Install in the reverse order.

Fig 1: Identifying Dismantling Tool (000 589 95 63 00)

Courtesy of MERCEDES-BENZ USA