Remove/Install Seat Occupancy Recognition Sensor - AR91.60-P-0720ME
Model 167
with code U10 (Automatic seat occupancy recognition and child seat recognition)
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Notes on safety-relevant components | AH00.00-Z-0019-01A | ||
| Remove/install | |||
| 1 | Remove seat cushion from front passenger seat. | AR91.10-P-3310ME | |
| 2 | Release and disconnect electrical connector (1) from seat occupancy recognition on front passenger seat (B41/1). | ||
| 3 | Unclip electrical connector (2) from seat occupancy recognition on front passenger seat (B41/1). | ||
| 4 | Remove bolt (3) from holder (4). | ||
| 5 | Release holder (4) using suitable means at catch hook, and remove. | ||
| 6 | Unhook, unclip and remove seat occupancy recognition on front passenger seat (B41/1). | Ensure seat occupancy recognition on front passenger seat (B41/1) is correctly routed. Malfunctions can occur otherwise. |
|
| 7 | Install in the reverse order | ||
| Finishing activity | |||
| 8 | Perform commissioning of Weight Sensing System (WSS) control unit (N110). | If seat occupancy recognition on front passenger seat (B41/1) was replaced. | |
| AD00.00-P-2000-06ME | |||
| Fig 2 |