Wiring Diagram Of Heater Booster Control Unit - PE83.70-P-2102-97IDA
Model 247 with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))
Control unit N33/5
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Use of wiring diagrams | 56L |
| A100 | High-voltage battery module | 17L |
| Code L | LEFT-HAND DRIVE | 18F |
| Code R | RIGHT-HAND DRIVE | 16F |
| F152/3 | Engine compartment fuse and relay module | 6L |
| F152/3f53 | Fuse 53 | 5K |
| N10 | Central control module | 13L |
| N129/1 | Power electronics control unit | 32L |
| N33/5 | High-voltage PTC heater | 4A |
| N33/5 | High-voltage PTC heater | 12A |
| N33/5 | High-voltage PTC heater | 20A |
| N33/5 | High-voltage PTC heater | 41A |
| N33/5 | High-voltage PTC heater | 48A |
| N33/5 | High-voltage PTC heater | 28A |
| S7 | High-voltage disconnect device | 22L |
| W3/1 | Ground point (right front wheel well) | 10K |
| W3/1 | Ground point (right front wheel well) | 27K |
| X25/13x1 | Left engine compartment/vehicle interior electrical connector | 17G |
| X25/13x3 | Left engine compartment/vehicle interior electrical connector | 15G |
| Y16/5 | High-voltage PTC heater switchover valve | 25L |
| Z68/24z1 | LIN B8-1 connector sleeve | 11E |