Remove/Install Rear Panoramic Roof Roller Sun Blind - AR77.21-P-0201MFB
Model 243, 247
with code 413 (Panoramic sliding sunroof/glass roof)
| Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | AS00.00-Z-0011-01A | |
| Remove/install | |||
| 1 | Remove headliner. | AR68.30-P-4300MFA | |
| 2 | Remove screw/bolts (2). | ||
| 3 | Remove roller sunblind (1) with guide rails (3) and take out of the vehicle. | ||
| 4 | Pull left and right drive cable guide tube (4) out of the guide rails (3). | When replacing roller sun blind (1). | |
| 5 | Remove screws (5) and detach guide rails (3) from roller sunblind (1) (arrow). | When replacing roller sun blind (1). | |
| 6 | Install in the reverse order. |