Wiring Diagram Of Exterior Lights - PE82.10-P-2000-97IDE
Model 247 with code 640 (SAE dynamic LED headlamps, right-hand traffic)
Headlamp E1, dynamic
Model 247 with code 641 (Dynamic LED headlamps, left-hand traffic)
Headlamp E1, dynamic
Model 247 with code 642 (Dynamic LED headlamps, right-hand traffic)
Headlamp E1, dynamic
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Use of wiring diagrams | 56L |
| B22/10 | Right rear level sensor | 28L |
| B22/3 | Rear axle level sensor | 25L |
| B22/9 | Right front level sensor | 21L |
| CAN PER | Peripherals CAN | 17K |
| Code 457 | Comfort suspension with adjustable damping | 20A |
| Code 459 | Steel suspension with adjustable damping | 20A |
| Code U54 | Torsion-beam axle | 23G |
| Code U55 | Multi-link axle | 27G |
| E1 | Left front lamp unit | 4A |
| E1 | Left front lamp unit | 12A |
| E1 | Left front lamp unit | 19A |
| E1 | Left front lamp unit | 41A |
| E1 | Left front lamp unit | 46A |
| E1 | Left front lamp unit | 28A |
| F152/3 | Engine compartment fuse and relay module | 11L |
| F152/3f22 | Fuse 22 | 8K |
| F152/3f48 | Fuse 48 | 10K |
| W3/2 | Left front wheel arch ground point | 15K |
| X25/14x2 | Right engine compartment/vehicle interior electrical connector | 23F |
| X30/27 | Peripherals CAN (CAN PER) potential distributor electrical connector | 17L |
| Z194/10z1 | Terminal 30t connector sleeve | 8F |
| Z194/11z1 | Terminal 30t connector sleeve | 10F |