Remove/Install Radial Shaft Sealing Ring Of Rear Axle Shaft On Rear Axle Housing - AR35.31-P-0542MFC
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 118, 177, 247 with engine 139
with code M005 (Vehicles with 4MATIC/all-wheel drive)
| Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil | Wear protective gloves, protective clothing and safety glasses. Do not pour transmission oil into beverage bottles. |
AS00.40-Z-0001-01A | |
| Notice | Notes on self-locking nuts and bolts | AH00.00-P-0001-01KOA | |
| Remove | |||
| 1 | Lift vehicle with vehicle lift. | AR00.60-P-1006A | |
| 2 | Remove corresponding rear axle shaft. | AR35.30-P-0621MFC | |
| 3 | Remove radial shaft sealing ring (1) from coupling housing (2) or coupling housing (3). | Do not damage mounting hole of radial shaft sealing ring (1). Otherwise leaks may occur. |
Fig 1 |
| 4 | Clean seat of radial shaft sealing ring (1). | Assembly cleaner | *BR00.45-Z-1028-04A |
| 5 | Check seat of radial shaft sealing ring (1) for damage. | If damage is visible, ↓ Replace the rear axle differential. |
AR35.31-P-0522MFG |
| Install | |||
| 6 | Press in radial shaft sealing ring (1) using punch-in drift (01) until the punch-in drift (01) makes contact with the coupling housing (2) or coupling housing (3). | Fig 2 | |
| 7 | Moisten sealing lip of radial shaft sealing ring (1) with transmission oil. | ||
| Transmission oils (specification 235.64) | BB00.40-P-0235-64A | ||
| 8 | Install corresponding rear axle shaft. | AR35.30-P-0621MFC | |
| Check | |||
| 9 | Check and correct transmission oil level of coupling housing (2) or coupling housing (3). | ||
| Rear axle - oil change | AP35.00-P-3501E | ||
| Risk of accident caused by vehicle starting off on its own when jacked up. Risk of injury caused by rotating parts when working on running engine or drive train. | Ensure that jack stands are standing firmly. An authorized person must occupy the driver's seat. Wear closed and snug-fitting work clothes. Do not touch hot or rotating | AS00.00-Z-0008-01A | |
| Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | AS00.00-Z-0005-01A | |
| 10 | Perform engine test run and check coupling housing (2) or coupling housing (3) for leak tightness. | ||
| 11 | Lower vehicle. | AR00.60-P-1006A |
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1028-04A | Assembly cleaner | A 000 986 56 01 |