000 588 38 80 00 Holding Device - WS72.00-P-0039B
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model All (4xWD, CAR, Heavy transporter, Light transporter)
Except for special protection vehicles
Use in FG 72/set B
Purpose:
Holding device for installing and removing doors.
Technical Note:
The maximum load capacity of the holding device is 150 kg.
NOTE:
Please observe the manufacturer specific accessories.
Procurement information:
This workshop appliance is not sold through the regular replacement part ordering process in GLC/LC, but instead directly through the manufacturer/supplier. Recommended workshop equipment and information about the manufacturers can be found in the WS document (see below).
Manufacturer
CON4TOOLS GmbH
Turnstrasse 11
42289 Wuppertal
Germany
http://www.con4tools.de
- Type/model: Multi-functional holding device for doors
Article no.: EFA06