Engine Mount, Engine Support (Vehicle Side) - BA22.10-P-1000-03P
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 118, 177, 243, 247
ENGINE MOUNT, ENGINE SUPPORT (ENGINE SIDE)
| Number | Designation | Model 118, 177, 247 | Model 243 | ||
|---|---|---|---|---|---|
| BA22.10-P-1001-03P | Screw, engine mount to body | M10 | Nm | 58 | 58 |
| M12 | Nm | 106 | 106 | ||
| BA22.10-P-1002-03P | Screw, engine mount to cylinder head | Nm | 58 | - | |
| BA22.10-P-1003-03P | Screw, engine mount to timing case cover | Nm | 58 | - | |
| BA22.10-P-1004-03P | Screw, engine mount to mounting support | Stage 1 | Nm | 58 | 50 |
| Stage 2 | ∠° | - | 90 | ||
| BA22.10-P-1005-03P | Screw, mounting support to engine carrier | Nm | 58 | - | |
| BA22.10-P-1006-03P | Screw, engine stabilizer mount at top to engine mount | M10 | Nm | - | 58 |
| M12 | Nm | 130 | 106 | ||
| BA22.10-P-1007-03P | Screw, engine mount engine stabilizer mount at top to body | Nm | 106 | 106 | |
| BA22.10-P-1008-03P | Screw, engine carrier engine stabilizer mount at bottom to front axle carrier | Stage 1 | Nm | 106 | 100 |
| Stage 2 | ∠° | - | 90 | ||
| BA22.10-P-1009-03P | Screw, lower engine stabilizer mount to engine carrier/electric drive | Nm | 106 | 106 | |
| BA22.10-P-1010-03P | Screw, transmission mount to body/transmission/mounting support | Nm | 106 | 106 | |
| BA22.10-P-1011-03P | Screw/nut, holder to transmission mount/body | Nm | 58 | 58 | |
| BA22.10-P-1012-03P | Screw, coolant expansion reservoir to transmission mount/transmission mount/crossmember holder | M8 | Nm | - | 23 |