Connecting Rods - BA03.10-P-1000-01J

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Engine 137, 260, 266, 270, 271, 274, 275, 277, 279

MODIFICATION NOTES

22.01.2018	Value changed: Screw/bolt, connecting rod bearing cap to connecting rod
23.02.2018	Value changed: Screw/bolt, connecting rod bearing cap to connecting rod

CONNECTING ROD

Number	Designation				Engine 137	Engine 270
BA03.10-P-1001-01J	Screw/bolt, connecting rod bearing cap to connecting rod	For initial tightening of new bolts	Stage 1	Nm	5	5
			Stage 2	Nm	15	15
			Stage 3	∠°	180	180
			Stage 4		Loosen bolts	Loosen bolts
			Stage 5	Nm	5	5
			Stage 6	Nm	15	15
			Stage 7	∠°	90	90
		In case of reusability	Stage 1	Nm	5	5
			Stage 2	Nm	15	15
			Stage 3	∠°	90	90

CONNECTING ROD

Number	Designation				Engine 271	Engine 274
BA03.10-P-1001-01J	Screw/bolt, connecting rod bearing cap to connecting rod	For initial tightening of new bolts	Stage 1	Nm	5	5
			Stage 2	Nm	15	15
			Stage 3	∠°	180	180
			Stage 4		Loosen bolts	Loosen bolts
			Stage 5	Nm	5	5
			Stage 6	Nm	15	15
			Stage 7	∠°	90	90
		In case of reusability	Stage 1	Nm	5	5
			Stage 2	Nm	15	15
			Stage 3	∠°	90	90

CONNECTING ROD

Number	Designation				Engine 275	Engine 277
BA03.10-P-1001-01J	Screw/bolt, connecting rod bearing cap to connecting rod	For initial tightening of new bolts	Stage 1	Nm	5	5
			Stage 2	Nm	15	15
			Stage 3	∠°	180	180
			Stage 4		Loosen bolts	Loosen bolts
			Stage 5	Nm	5	5
			Stage 6	Nm	15	15
			Stage 7	∠°	90	90
		In case of reusability	Stage 1	Nm	5	5
			Stage 2	Nm	15	15
			Stage 3	∠°	90	90

CONNECTING ROD

Number	Designation				Engine 279	Engine 260
BA03.10-P-1001-01J	Screw/bolt, connecting rod bearing cap to connecting rod	For initial tightening of new bolts	Stage 1	Nm	5	5
			Stage 2	Nm	15	15
			Stage 3	∠°	180	180
			Stage 4		Loosen bolts	Loosen bolts
			Stage 5	Nm	5	5
			Stage 6	Nm	15	15
			Stage 7	∠°	90	90
		In case of reusability	Stage 1	Nm	5	5
			Stage 2	Nm	15	15
			Stage 3	∠°	90	90

CONNECTING ROD

Number	Designation				Engine 266
BA03.10-P-1001-01J	Screw/bolt, connecting rod bearing cap to connecting rod	For initial tightening of new bolts	Stage 1	Nm	5
			Stage 2	Nm	15
			Stage 3	∠°	180
			Stage 4		Loosen bolts
			Stage 5	Nm	5
			Stage 6	Nm	15
			Stage 7	∠°	90
		In case of reusability	Stage 1	Nm	5
			Stage 2	Nm	15
			Stage 3	∠°	90