General Notes: Passenger Cars: Crank Assembly - AH03.00-Z-9999AZ
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model All
| Assignment of pistons to cylinder bore | Engine 612 | AH03.10-B-0001-02A | |
| Assignment of pistons to cylinder bore | ENGINE 266.920/940/960/980 | AH03.10-P-0001-02AK | |
| Assignment of pistons to cylinder bore | ENGINE 639.939 in MODEL 454.0 | AH03.10-P-0001-02FG | |
| Notes on assessing wear on connecting rod bearings and connecting rod journals | Engine All (4xWD, CAR, smart) Engine All (Light transporter) | AH03.10-P-0001-03 MM | |
| Notes on the assessment of pistons and piston rings | ENGINE 111, 112, 113, 133, 137, 139, 152, 155, 156, 157, 159, 166, 176, 177, 200, 254, 256, 260, 264, 266, 270, 271, 272, 273, 274, 275, 276, 277, 278, 279, 281, 282, 285... | AH03.10-P-0001-04 MM | |
| Notes on the assessment of pistons and piston rings | ENGINE 607, 608, 611, 612, 613, 622, 626, 628, 629, 639, 640, 642, 646, 647, 648, 651, 654, 656, 668, 699... | AH03.10-P-0001-04MN | |
| Installation notes for crankshaft radial shaft seals | ENGINE 120 | AH03.20-P-0001-01AO | |
| General information on assigning balancing shaft to engine | Engine 112 | AH03.20-P-1000-01AV | |
| Information on assessing wear of main bearings and main bearing journals | Engine All (4xWD, CAR, smart) Engine All (Light transporter) | AH03.20-P-1000-02 MM | |
| Bearing diagram for crankshaft | ENGINE 639.939 in MODEL 454.0 | AH03.20-P-4351-01FG | |
| Bearing diagram for crankshaft | ENGINE 111, 166, 611, 612, 647, 668... | AH03.20-P-4351-01GF | |
| Bearing diagram for crankshaft | Engine 601, 602 (except 602.98), 603 Engine 601.943, 602.980/982/983/984/985 |
AH03.20-P-4351-01KOB | |
| Bearing diagram for crankshaft | Engine 266.920/940/960/980 Engine 271.951 in model 906 Engine 271 Engine 640 | AH03.20-P-4351-01TK | |
| Interference fit of crankshaft bearing cap | AH03.20-B-4351-02A | ||
| Interference fit of crankshaft bearing cap | ENGINE 132, 133, 134, 135, 152, 157, 260, 264, 270, 274, 276, 278, 607, 608, 639... | AH03.20-P-4351-02 MM | |
| Interference fit of crankshaft bearing cap | ENGINE 111, 166, 266, 271, 272, 273, 601, 602, 604, 605, 606, 611, 612, 613, 640, 647, 668... | AH03.20-P-4351-02VA |