000 588 07 82 00 Filling Unit - WS14.00-P-0014B
Model All (4xWD)
Model All (CAR) > with code 6U7 (BlueTEC SCR diesel exhaust gas cleaning, generation 4)
Model All (CAR) with code 972 (Exhaust system with DPF, generation 2.0)
Model All (CAR) with code U42 (BlueTEC diesel exhaust treatment (SCR))
Model All (CAR) with code U77 (Diesel Emission control BLUETEC (SCR))
Model All (CAR) with code U79 (BLUETEC (SCR) diesel exhaust treatment, generation 3)
Model All (Light transporter)
Use in FG 14/49 Set A/B
Purpose:
AdBlue® filling system for drop free charging of SCR storage tank.
Procurement information:
This workshop equipment is not sold through the regular replacement part ordering process in GLC/LC, but instead directly through the manufacturer/supplier. Recommended workshop equipment and information about the manufacturers/supplier are available in the maintenance system document (see below).
Manufacturer 1
AUTOTESTGERATE Leitenberger GmbH
Bahnhofstraβe 33
72138 Kirchentellinsfurt
Germany
http://www.autotestgeraete.de
- Model: AdBlue® filling system Article number: ABE 02_MB
- Accessories: extension 30 mm Article number: ET 652_30
- Accessories: extension 80 mm Article number: ET 652_80
Manufacturer 2
lumatic Hermann Lummen GmbH
Biberweg 32
53842 Troisdorf-Spich
Germany
http://www.luematic.de
- Calibration capable:
Device for countries with a duty to calibrate
- Type/model: AUS32MobilDB
Article number: AUS32MobilDB
- Type/model: AUS32IBCWand
Article number: AUS32IBCWand
- Type/model: AUS32MobilDB
- Not calibration capable:
- Type/model: AUS32MobilDB Article number: AUS32MobilDB/NE
- Cannot be calibrated USA version:
- Type/model: AUS32MobilDB Article number: AUS32MobilDB/US
Manufacturer 3
Flaco Gerate GmbH
Isselhorter Strasse 377
33334 Gutersloh
Germany
http://www.flaco.de
- Calibration capable:
Device for countries with a duty to calibrate
- Type/model: FLACOblue200MID
Article no.: 40603462
- Type/model: FLACOblue200MID
- Not calibration capable:
- Type/model: FLACOblue200
Article no.: 40603461
- Type/model: FLACOblue200
Manufacturer 4
GL GmbH Metall- und Werkstatt
Nurtinger Str. 23-25
72636 Frickenhausen, Germany
Germany
http://www.gl-gmbh.de
- Not calibration capable:
- Type/model: ABBG 210
Article no.: ABBG 210
- Type/model: ABBG 210