168 589 00 14 00 Sleeve - WS26.00-P-0063C
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Transmission 700.41, 711.6, 716.5/508/509/513/514/6, 717.4, 722.750/751/8, 724.0
Use in FG 26/27Set C
Intended use:
Transmission 711.6, 716.5/508/509/513/514/6, 717.4, 722.750/751/8, 724.0
Sleeve for pressing in bearing shells and for removing drive shaft bearing.
Transmission 700.41
Sleeve in combination with W711 589 07 15 00 Drift for installing radial shaft sealing ring at output end.