Remove/Install Seat Backrest Trim - AR91.10-P-1912MFA

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model 118, 177, 243, 247

with code 7U2 (Luxury front seats)

Model 118

with code 7U3 (Sport seats, front)

Model 177

with code 7U3 (Seat model variant 3)

Model 243

with code 7U4 (Sports seats for driver and front passenger)

Shown on removed driver seat

Courtesy of MERCEDES-BENZ USA

Courtesy of MERCEDES-BENZ USA

Shown on removed driver seat

	Remove/install
1	Move left or right front seat to foremost position and move seat backrest (1) to an upright position.
2	Release weather strip (2) at seat backrest trim (3) until the screws (4) are accessible.	Extraction hook	Fig 1
3	Unscrew screw/bolts (4).
4	Push seat backrest trim (3) on seat backrest (1) downwards and remove.	When removing the seat backrest trim (3), pay attention to the guides (5). The guides (5) may otherwise be damaged. : Ensure that the guides (5) in the seat backrest frame (6) are seated correctly.
5	Install in the reverse order.

Fig 1: Identifying Extraction Hook (140 589 02 33 00)

Courtesy of MERCEDES-BENZ USA