Remove/Install Rear Side Airbag - AR91.60-P-0694MFA
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 118, 177, 243, 247
with code 293 (Side Airbag in rear left and right)
MODIFICATION NOTES
| 25.07.2019 | Remove foam material wedge (2). | Operation step 2. | |
| 19.10.2023 | Nut, Side Airbag unit to backrest frame | Model 247 | BA91.60-P-1008-01Q |
Fig 1: Rear Side Airbag Components Location - Model 118 With Code 293 (Shown On Model 177.0 Right Side)
Shown on model 177.0 on right side of vehicle
| Risk of injury during testing and repair operations related to pyrotechnical components | Do not expose pyrotechnical component parts to temperatures above 100°C or 212°F. Disconnect current supply when working on such component parts. | AS91.00-Z-0008-01A | |
| Notice | Notes on self-locking nuts and bolts | AH00.00-P-0001-01KOA | |
| Notice | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Information, assessment and legal requirements when working with, handling and storing pyrotechnical components | AH91.00-Z-0000-10A | ||
| Notes on safety-relevant components | AH00.00-Z-0019-01A | ||
| Remove/install | |||
| 1 | Remove rear seat cushion (1) and place down on a suitable mat. | Model 118, 177, 243.7, 247 with code 293 (Side Airbag in rear left and right) |
AR91.12-P-1021MFA |
| 2 | Remove foam material wedge (2). | Model 118, 177 with code 293 (Side Airbag in rear left and right) |
|
| 3 | Remove nuts (4). | *BA91.60-P-1008-01Q | |
| 4 | Remove side airbag (3) until the electrical connector is accessible. | This will result in damage to the electric lines and can impair their function. |
|
| 5 | Release and disconnect electrical connector at side airbag (3). | Fig 2 | |
| 6 | Remove side airbag (3) and place down on suitable mat. | ||
| 7 | Install in the reverse order. |
AIRBAG
| Number | Designation | Model 118 | Model 177 | |
|---|---|---|---|---|
| BA91.60-P-1008-01Q | Nut, Side Airbag unit to backrest frame | Nm | 7 | 7 |
AIRBAG
| Number | Designation | Model 243 | Model 247 | |
|---|---|---|---|---|
| BA91.60-P-1008-01Q | Nut, Side Airbag unit to backrest frame | Nm | 7 | 6 |