Remove/Install Armrest - AR91.12-P-1744MFA
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 118, 177, 247
with code 400 (Rear armrest)
Model 243
Shown on model 243
| Notes on safety-relevant components | AH00.00-Z-0019-01A | ||
| Remove/install | |||
| 1 | Unlock center seat backrest (1) and fold forwards. | ||
| 2 | Remove screw (3) of trim strips (4) on left and right sides of armrest (2). | ||
| 3 | Unclip trim strips (4) on left and right sides of armrest (2) and remove. | Otherwise the trim strips (4) could be damaged. |
Fig 1 |
| 4 | Lift center trim (5) at top and remove. | ||
| 5 | Unscrew screws (6). | *BA91.12-P-1010-03N | |
| 6 | Fold up armrest (2) and remove. | ||
| 7 | Install in the reverse order. |
REAR SEATS
| Number | Designation | Model 118 | Model 177 | ||
|---|---|---|---|---|---|
| BA91.12-P-1010-03N | Bolt, armrest to backrest frame | M6 | Nm | - | - |
REAR SEATS
| Number | Designation | Model 243 | Model 247 | ||
|---|---|---|---|---|---|
| BA91.12-P-1010-03N | Bolt, armrest to backrest frame | M6 | Nm | 8 | - |