Seam Seal On Fender Service Information - Si97.10-P-0006A
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 118, 156, 166, 176, 177, 205, 213, 217, 222, 238, 247, 253, 292
In this Service Information we would like to notify you of the following with regard to the continuous improvement in our quality standards:
When replacing or repairing a fender at the left or right, as part of repair, and if not already available as standard, a seam seal (A) must be applied in the inner area of the fender. Width of seam seal (A) is approx. 30 mm, thickness of seam seal (A) is approx. 2-3 mm.
The corresponding seam seal (A) is available in XENTRY Parts Information under the category "Paints & operating fluids".