Cavity Preservation Following Repair Work - Ar97.20-P-1500MFA

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model 118

Model 177

Model 247

Differences in cavity preservation

Courtesy of MERCEDES-BENZ USA

Cavity preservation on hood, shown on model 177.0

Courtesy of MERCEDES-BENZ USA

Cavity preservation on fender, shown on model 177.0

Courtesy of MERCEDES-BENZ USA

Cavity preservation on front door, shown on model 177.0

Courtesy of MERCEDES-BENZ USA

Cavity preservation on rear door, shown on model 177.0

Courtesy of MERCEDES-BENZ USA

Cavity preservation on the liftgate, shown on model 177.0

Courtesy of MERCEDES-BENZ USA

Cavity preservation on front end-assembly at the front, shown on model 177.0

Courtesy of MERCEDES-BENZ USA

Cavity preservation on the side front-end assembly on the inside and outside, shown on model 1770

Courtesy of MERCEDES-BENZ USA

Courtesy of MERCEDES-BENZ USA

Cavity preservation on front top longitudinal member, A-pillar, B-pillar, sidewall paneling, and on side longitudinal member, shown on model 177.0

Cavity preservation on rear wheel well and on rear bottom longitudinal member, shown on model 177.0

Courtesy of MERCEDES-BENZ USA

Cavity preservation on rear area, shown on model 177.0

Courtesy of MERCEDES-BENZ USA

Cavity preservation on underbody, shown on model 177.0

Courtesy of MERCEDES-BENZ USA

Picture no., etc.	Work notes
	Risk of explosion and poisoning caused by solvent vapors and gasses. Risk of injury to skin and eyes when working with anticorrosion agents	Never spray corrosion protection on flames or hot, glowing objects and keep them well away from all potential sources of ignition. Use them only in well-ventilated rooms; wear respiratory protection.	AS97.00-Z-0001-01A
Topical note	Notes on cavity preservation		AH97.20-P-0001-01B
A	Cavity preservation in folding areas and hollow cavities.
		Commercially available devices/tools Pressure spray gun	GF98.00-P-2045A
		Install from inside through openings (arrows) with hook probe. Cavity preservation (free of solvents), 1 liter	*BR00.45-Z-1003-05A
B	Cavity preservation for inner areas and gaps.
		Commercially available devices/tools Pressure spray gun	GF98.00-P-2045A
		Uniformly moisten cavity preservation. Cavity preservation (free of solvents), 1 liter	*BR00.45-Z-1003-05A

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1003-05A	Cavity preservation (free of solvents), 1 liter	A 000 986 72 70 10