Remove/Install Transmission Cooling Module - AR27.55-P-1500MFC
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Transmission 724.0 in model 118, 177, 247
| Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90°C. Open cap slowly and release the overpressure. Do not pour coolant into beverage containers. Wear protective gloves, protective clothing and safety glasses. |
AS20.00-Z-0001-01A | |
| Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil | Wear protective gloves, protective clothing and safety glasses. Do not pour transmission oil into beverage bottles. |
AS00.40-Z-0001-01A | |
| Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels. |
AS00.00-Z-0017-01A | |
| Notice | Notes on avoiding damage through contamination and foreign objects | AH00.00-P-5000-01A | |
| Notice | Notes on self-locking nuts and bolts | AH00.00-P-0001-01KOA | |
| Notes on automatic transmission | AH27.19-P-0001-01NKB | ||
| Remove/install | |||
| 1 | Switch off ignition and store transmitter key outside of transmitter range (min. 2 m). | ||
| 2 | Drain off coolant. | AR20.00-P-1142MFC | |
| 3 | Remove air filter unit. | AR09.10-P-1150MFC | |
| 4 | Unclip electrical wiring harness from transmission oil cooling module (1). | ||
| 5 | Release and remove coolant hose (4) from cooler. | AR20.20-P-7441-01RQ | |
| 6 | Unscrew bolts (3). | *BA27.10-P-1002-04F | |
| 7 | Remove transmission oil cooling module (1) from automatic transmission with coolant hoses (2, 4) remaining and collect escaping transmission oil with a suitable container. | ||
| 8 | Remove coolant hose (2) from transmission oil cooling module (1). | Fig 2 | |
| 9 | Remove transmission oil cooling module (1) and seal openings with suitable means. | ||
| 10 | Remove coolant hose (4) from transmission oil cooling module (1). | If the transmission oil cooling module (1) is replaced. |
Fig 2 |
| 11 | Unscrew oil filter cover (6) and remove oil | If the transmission oil cooling module (1) is replaced. |
*BA27.10-P-1003-04F |
| 12 | Install in the reverse order. | ||
| Check | |||
| 13 | Check transmission oil level, and correct if necessary. | AR27.00-P-0104MFC | |
| 14 | Check cooling system for leaks. | AR20.00-P-1010MFD | |
| Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | AS00.00-Z-0005-01A | |
| Risk of burn injuries , suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust. | Wear protective clothing and safety glasses. Use the extraction system. Move people out of the danger zone. | AS49.00-Z-0001-01A | |
| 15 | Perform engine test run and check transmission for proper operation and leaktightness. |
AUTOMATIC TRANSMISSION COMPLETE
| Number | Designation | Transmission 724.0 | |
|---|---|---|---|
| BA27.10-P-1002-04F | Bolt, cooler module to transmission housing | Nm | 8 |
AUTOMATIC TRANSMISSION COMPLETE
| Number | Designation | Transmission 724.0 | |
|---|---|---|---|
| BA27.10-P-1003-04F | Oil filter cover to cooler module | Nm | 25 |