Install Tapered Roller Bearing Outer Race In Transmission Housing - AR27.40-P-0510-02NKB
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Transmission 724.0 in model 117
Transmission 724.0 in model 118, 177, 247
Transmission 724.0 in model 156
Transmission 724.0 in model 176
Transmission 724.0 in model 242
Transmission 724.0 in model 246
The following special tools are required:
Drift (164 589 00 15 00) (05),
drift (124 589 06 15 00),
drift (203 589 03 15 00) (06).
Always replace the tapered roller bearing outer races (52, 62S, 82S) after removal.
- Position transmission housing (27G) onto press and prop up using suitable tool.
- Insert oil funnel (60F) and oil duct (80F) into transmission housing (27G).
- Press tapered roller bearing outer races (62S, 82S) using
drift (05) all the way into the transmission housing (27G).
- Press tapered roller bearing outer race (52) of differential using