Remove/Install Poly-V-Belt Tensioning Device - AR13.25-P-3220MFI
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Engine 260 in model 118, 177, 247 with code B01 (48V technology)
Engine 282.8 in model 118, 177, 247 with code B01 (48V technology)
Shown on engine 282.8
Fig 1: Poly-V-Belt Tensioning Device Components Location - Engine 260 In Model 118 With Code B01 (Shown On Engine 282.8)
| Risk of injury . Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | AS00.00-Z-0002-01A | |
| Risk of injury . Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating area of mechanical components when moving components. | AS00.00-Z-0009-01A | |
| Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels. |
AS00.00-Z-0017-01A | |
| Remove/install | |||
| 1 | Remove poly-V-belt.- | Engine 260 in model 118 177 247 with code B01 (48V technology) | AR13.22-P-1202MFB |
| Engine 282 8 in model 118 177 247 with code B01 (48V technology) | AR13.22-P-1202MFI | ||
| 2 | Remove screws (2) and remove tensioning device (1). | *BA13.25-P-1006-01Z | |
| *BA13.25-P-1001-01FA | |||
| 3 | Install in the reverse order. |
BELT TENSIONING DEVICE
| Number | Designation | Engine 282 | |
|---|---|---|---|
| BA13.25-P-1001-01FA | Screw, belt tensioner to alternator | Nm | 20 |
BELT TENSIONING DEVICE
| Number | Designation | Engine 260 except code 9U8 | Engine 260 with code 9U8 | |
|---|---|---|---|---|
| BA13.25-P-1006-01Z | Screw, belt tensioner to alternator | Nm | - | 20 |