LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2025 >> GLA250 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Interior Equipment -- 118 Chassis) >> Testing & Repair >> Remove/Install Trim At C-Pillar - AR68.30-P-4490MFV

Remove/Install Trim At C-Pillar - AR68.30-P-4490MFV

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model 118.3, 177.1/9 

Shown on model 177.1 

G16063804Courtesy of MERCEDES-BENZ USA
REMOVINGINSTALLING Remove/install     
1 Remove cover (2). SPECIAL TOOL Long wedge Fig 1
2 Unclip and remove C-pillar trim (1) at retaining clips (3). INSTALLATION IMPORTANT : Ensure that the edge guard is seated correctly in the working area.  
3 Install in the reverse order.    
Fig 1: Identifying Long Wedge (115 589 03 59 00)
G07070400Courtesy of MERCEDES-BENZ USA