Exhaust System - BA49.10-P-1000-02X
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Engine 139 in model 118, 177, 247
EXHAUST SYSTEM
| Number | Designation | Engine 139 in model 118, 177, 247 | |
|---|---|---|---|
| BA49.10-P-1001-02X | Clamp/nut, front exhaust system to exhaust gas turbocharger | Nm | 17 |
| BA49.10-P-1002-02X | Nut, center exhaust system holder to front axle carrier | Nm | 20 |
| BA49.10-P-1003-02X | Clamp, rear exhaust system to center exhaust system | Nm | 25 |
| BA49.10-P-1004-02X | Bolt, exhaust system holder to intermediate shaft support | Nm | 20 |
| BA49.10-P-1005-02X | Clamp, exhaust pipe to catalytic converter | Nm | 25 |
| BA49.10-P-1006-02X | Nut, elastomer bearing to rear reinforcement | Nm | 25 |
| BA49.10-P-1007-02X | Bolt, transmission tunnel brace to body-in-white | Nm | 30 |
| BA49.10-P-1008-02X | Union nut, pressure line to catalytic converter | Nm | 20 |
| BA49.10-P-1009-02X | Bolt, pressure line to catalytic converter holder | Nm | 20 |
| BA49.10-P-1010-02X | Nut, catalytic converter to exhaust system holder | Nm | 20 |