Remove/Install Gesture Camera - AR82.90-P-0003MFA

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model 118, 177, 243, 247

with code 77B (Contactless gesture control at front)

Shown on model 118 with code 77B (Contactless gesture recognition system at front)

Fig 1: Hand Motion Sensor Components Location - Model 118 With Code 77B

Courtesy of MERCEDES-BENZ USA

Topical note	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
1	Remove overhead control panel control unit (N70).		AR82.20-P-1000MFA
2	Remove bolts (1).
3	Unclip hand motion sensor (B84/15) from overhead control panel control unit (N70) (arrows).	Dismantling tool	Fig 2
4	Install in the reverse order.
5	Perform commissioning of hand motion sensor (B84/15).	When replacing hand motion sensor (B84/15).
			AD00.00-P-2000-06MFA

Fig 2: Identifying Dismantling Tool (000 589 95 63 00)

Courtesy of MERCEDES-BENZ USA