Remove/Install KEYLESS-GO Antenna In Trunk - AR80.61-P-0031MFA
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 118, 177, 243, 247
with code 889 (KEYLESS-GO)
MODIFICATION NOTES
| 10.12.2020 | New operation step inserted. | Operation Step 3 | |
| 10.12.2020 | New operation step variant added. | Operation step 4.2 |
Shown on model 177.0 with code 889 (KEYLESS-GO)
| Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | AS00.00-Z-0011-01A | |
| Notice | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Notes on HANDS-FREE ACCESS | AH80.61-P-0001-01A | ||
| Remove/install | |||
| 1 | Switch off ignition and store transmitter key outside of transmitter range (min. 2 m). | ||
| 2.1 | Remove right rear seat of 3rd seat row. | Model 243.6, 247.6 with code 847 (3rd seat row) with code 889 (KEYLESS-GO) | AR91.12-P-0007MFX |
| 2.2 | Remove load compartment floor (1). | Model 118, 177, 243.7, 247.0/7 with code 889 (KEYLESS-GO) Model 243.6, 247.6 with code 889 (KEYLESS-GO) except code 847 (3rd seat row) |
|
| 3 | Fold up rear floor until load compartment KEYLESS-GO antenna (A2/61) is accessible. | ||
| 4.1 | Unclip the KEYLESS-GO antenna in the load compartment (A2/61) (arrows) and remove carefully until the electrical connector is accessible. | Model 118, 177, 247 with code 889 (KEYLESS-GO) |
|
| 4.2 | Detach nuts of load compartment KEYLESS-GO antenna (A2/61) and carefully remove until electrical connector can be accessed. | Model 118 with code 889 (KEYLESS-GO) with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN)) Model 177 with code 889 (KEYLESS-GO) with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN)) Model 243 with code 889 (KEYLESS-GO) Model 247 with code 889 (KEYLESS-GO) with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN)) |
|
| 5 | Release and disconnect electrical connector and remove KEYLESS-GO antenna in the load compartment (A2/61). | ||
| 6 | Install in the reverse order. |