Rear Window - BE67.20-P-1000-01S
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 118, 177
TEST AND ADJUSTMENT VALUES FOR REAR WINDOW
| Number | Designation | Model 118.3 | Model 118.6 | ||
|---|---|---|---|---|---|
| BE67.20-P-1002-01S | Distance between lower edge of window and liftgate panel edge | Dimension "B" | mm | - | 3 (-1, 5/+1) |
| BE67.20-P-1003-01S | Gap between side edge of window and edge of liftgate paneling | Dimension "C" | mm | - | 3 (±1) |
| BE67.20-P-1004-01S | Rear window to side wall | Dimension "D" | mm | 3 (±1) | - |
| BE67.20-P-1005-01S | Height of rear window to side wall | Dimension "D1" | mm | -4, 5 (±1, 5) | - |
| BE67.20-P-1006-01S | Rear window to roof | Dimension "E" | mm | 2, 5 (±1) | - |
| BE67.20-P-1007-01S | Height of rear window to roof | Dimension "E1" | mm | -2 (±1) | - |
TEST AND ADJUSTMENT VALUES FOR REAR WINDOW
| Number | Designation | Model 177.0 | Model 177.1/9 | ||
|---|---|---|---|---|---|
| BE67.20-P-1002-01S | Distance between lower edge of window and liftgate panel edge | Dimension "B" | mm | 3 (±1) | - |
| BE67.20-P-1003-01S | Gap between side edge of window and edge of liftgate paneling | Dimension "C" | mm | 3 (+1/-2) | - |
| BE67.20-P-1004-01S | Rear window to side wall | Dimension "D" | mm | - | 3 (±1) |
| BE67.20-P-1005-01S | Height of rear window to side wall | Dimension "D1" | mm | - | -3, 5 (±1, 5) |
| BE67.20-P-1006-01S | Rear window to roof | Dimension "E" | mm | - | 2, 5 (±1) |
| BE67.20-P-1007-01S | Height of rear window to roof | Dimension "E1" | mm | - | -2 (±1) |