000 588 05 19 00 Vehicle Level Inclinometer - WS40.00-P-0007B

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model All (4xWD, CAR, Light transporter, smart)

Use in FG 32/40/Set B

Purpose:

Electronic inclinometer/vehicle level measuring instrument for measuring angles at defined contact points.

Test equipment category CAT_A.

NOTE: Device CM 09606-10 is the basic unit for angle measurement. It is used to determine the vehicle level.

The combined measuring equipment with article number 09905-30 has an additional measuring mode for determining the inclination angle and showing it on the display.

Procurement information:

This workshop equipment is not sold through the regular replacement part ordering process in GLC/LC, but instead directly through the manufacturer/supplier. Recommended workshop equipment and information about the manufacturers/supplier is available in the maintenance system document (see below).

Courtesy of MERCEDES-BENZ USA

Manufacturer

ROMESS Rogg Apparate + electronic GmbH & Co. KG

Dickenhardtstrasse 67

78054 VS- Schwenningen

Germany

http://www.romess.de

Type/model: Electronic inclinometer Article no. CM 09606-10